Soundbars · 3 min read
LG S95TR in a Condo: Plan Rear Speakers and Subwoofer
Sketch the room with every audio component included. Rear speakers and a subwoofer need positions that work alongside everyday living.
An LG S95TR package adds rear-speaker planning to the usual question of where a soundbar goes. In a condo living room, those positions need to work with walkways, dining furniture and the seats people use each day.
Draw the room before comparing packages. Include power points and places where a speaker could stand without interfering with doors or daily movement.
Include every supplied component
LG identifies S95TR as a soundbar system with rear speakers. Its listed rear-speaker dimensions are 159 × 223 × 142mm, while the subwoofer is 201.7 × 407 × 403mm. LG Malaysia S95TR component specification
Use the measurements to mark potential positions. Ask for the placement and connection requirements of the complete supplied package before buying stands or brackets.
Start from the sofa position
Show whether the sofa is against a wall, beside a doorway or in the middle of an open living area. Ask the supplier how the rear speakers should be arranged for that layout.
Include the seats used less often, such as a dining chair facing the television. A proposed position should be assessed against the way the room is actually occupied.
Check whether stands, shelving or wall supports are needed. Confirm their suitability and installation separately rather than balancing a component on an available narrow edge.
Give the subwoofer a considered location
Identify possible positions with suitable access and clearance. Show the installer nearby cabinets, furniture legs and the route between the sofa and TV.
Ask to assess the sound in the room after setup. Avoid committing to a concealed position solely because the component fits inside the available opening.
Tell the supplier about your normal listening hours and volume preferences. Ask which system settings you can adjust for everyday use and have those changes demonstrated.
Check power and cable routes
Confirm which components need power and which connections run between them. A wireless audio link should not be used as an assumption that every component operates without a power connection.
Plan the route so normal movement through the room remains practical. Discuss permanent electrical changes with a qualified electrician where required.
Ask the installer to label or document the final arrangement. Keep the equipment's instructions so you can reconnect it if furniture is moved.
Try ordinary listening before handover ends
Play familiar dialogue and music at the volume you expect to use. Ask how to select the relevant sound mode and adjust the components within the supported controls.
Check that all intended sources produce sound in the agreed setup. Save the selected settings or write them down before finishing the demonstration.
Frequently asked questions
Can rear speakers go wherever there is a spare surface?
Have their positions assessed against the system instructions and room layout. Confirm support, clearance and connection needs.
Does calibration remove the need to plan positions?
Ask the installer to assess placement first and explain the supported setup process. Keep the room's practical constraints in the discussion.
Plan S95TR around your room layout
View LG S95TR and send your sofa, TV and power-point positions through our soundbar enquiry page.
Back to all blogs ↗
